The Sky Meridian team's projects

Design and consultancy for the reconfiguration of boarding/deboarding apron no. 1 at Oradea Airport. The documentation includes the technical project, execution details, and specifications.

Read the case study and view the plans

Design and consultancy for the feasibility study of the "Hangars for aircraft storage, parking, and maintenance at Oradea International Airport" project. The same contract also mentions specialized consulting services in relation to Government Decision no. 1/2018.

Read the case study and view the drawings

Design and consulting services for the feasibility study regarding the expansion of turning pads, stopway, and shoulders at Oradea Airport.

Read the case study and view the plans

The project involves the construction of the airport's perimeter service road, with a total length of approximately 8.48 km and a carriageway with widths of 3.50–5.50 m. The works include 24 passing bays, 2 turning platforms, shoulders, 5 DN1000 pipe culverts, earthworks and asphalt road structure, as well as the implementation of vertical and horizontal road signage.

The project provides for the construction of a perimeter road to ensure air traffic safety. The perimeter road is 7400.2 m long and has an area of 27800 sqm. The perimeter road will have a load-bearing width of 3.5 m and will be flanked by 0.5 m wide shoulders on each side. At intervals of approximately 250-300 m (depending on visibility), the perimeter road will be equipped with trapezoidal-shaped passing bays with a short side of 20 m, a long side of 40 m, and two 10 m long approach tapers.

The project provides for the construction of a connecting road between Terminal 1 (new) and the passenger Terminal 2, with a length of 117.967 m and a carriageway width of 6.00 m. The arrangement of a sidewalk parallel to the road leading to the newly constructed parking lot and the creation of a new fence within the airport premises to delimit public access areas from restricted ones, the demolition of a concrete fence, the relocation of an existing access gate, and the installation of new gates. This documentation covers the works necessary for the construction of the rainwater drainage network to be built on Alley 5, Oradea Airport.

The project provides for the execution of the following works: Creation of a deceleration lane. This will start with a 35 m long taper, and the lane itself, 70 m long, starting from Arad at km 110+88.09 and ending at the airport entrance at km 110+218.11; Creation of an acceleration lane (primary). This will start with the lane itself, 70 m long, and will end with a 35 m long taper, starting from km 110+223.60 and extending to km 110+352.46; Creation of an acceleration lane (secondary). This will start with the lane itself, 70 m long, and will end with a 35 m long taper, starting from km 110+675.55 and ending at km 110+806.77. This documentation addresses the works required for the implementation of the rainwater sewerage network for collecting meteorological waters from the acceleration and deceleration lanes on DN79 of the Oradea Municipality airport, Bihor county.

The project provides for the rehabilitation of the platforms, internal roads, and their rainwater drainage system at Oradea Airport, Bihor County. The total length of the alleys is 393 m, with a total of 90 parking spaces.

The project provides for the creation of access to the European national road DN1 E60 for the property with cadastral no. 52614. Through the realization of the objective, the aim is to build an access along with the drainage of rainwater.

The project provides for the construction of 6,658 m of two-way bicycle paths in the localities of Călugăreni and Felnac, Felnac commune, Arad county. The works include the installation of curbs, the arrangement of the rainwater collection and drainage system using concrete ditches, road gutters, and DN600 corrugated pipes, as well as the adaptation of the route in areas crossing existing ditches.

The project provides for the creation of access to the European national road DN1 E60 for the property with cadastral no. 180273. Through the realization of the project, the aim is to build an access point together with a rainwater drainage system.

The project provides for the modernization works described in the documentation. The investment that is the subject of this approval documentation for intervention works aims to improve the social and economic situation of the inhabitants of Drăgănești commune, by modernizing the localities of Grădinari, Mizieș, and Sebiș, which facilitate the connection with the European national road DN76 E79. Grădinari locality 2519 m, Mizieș locality 5544 m, Sebiș locality 5039 m.

Design stages

• DALI · 12.2021
• PT + DE · 12.2022

The project provides for the design and construction of a network of bicycle paths in the municipality of Salonta, with a total length of 15,517.90 m. The works aim to develop infrastructure for cycling mobility, ensure safe and accessible routes for cyclists, and improve connectivity between different areas of the municipality.

The project provides for the rehabilitation of Bolyai Janos Street with a new road structure, a bicycle lane, a concrete ditch for rainwater redirection, accesses, and sidewalks. The planned works include the arrangement of a carriageway with a total length of 877 m and widths varying between 4.00–6.00 m, the construction of an 877 m bicycle lane, an 805 m sidewalk, as well as water drainage works, curbs, 36 accesses, 3 DN 600 tubular culverts, and 3 drop manholes.

The project provides for the following works: rehabilitation and modernization of the 5 streets in the locality of Gurani, Pietroasa commune, Bihor county. The solution involves: o Rehabilitation of the road system along the entire length of the streets 2950 m o Rehabilitation of the road shoulders o Rehabilitation of sidewalks o Rehabilitation of property accesses o Realization of rainwater drainage through concrete ditches, gutters, and culverts.

The project involves the construction of a parking lot and an access road to the parking lot, in the village of Ciumeghiu, Ciumeghiu commune. The proposed development includes a 19-space parking lot covering 618 sqm, served by a 270 sqm access road, both featuring an asphalt road structure, road signage, a DN 600 mm tubular culvert, a concrete ditch for water collection, and landscaping through the planting of 15 ornamental trees (Thuja).

Design stages

• FS · 06.2022
• TD + DD · 06.2022

The project provides for the modernization of a street in the village of Săldăbagiu Mic, in Căpâlna commune, Bihor county. LOCATION SĂLDĂBAGIU MIC - street 1 with a length of 595 m. The ditch with natural slopes will have a total length of 880 m. 15 tubular culverts will be built where necessary (according to the site plan), with a length of L=4.00 m and a nominal diameter of DN=315 mm.

The project provides for the modernization of streets in the villages of Forosig, Dumbrava, and Lupoaia in Holod commune, by creating a modern structure with asphalt paving. Forosig village 3899 m, Dumbrava village 1419 m, Lupoaia village 1516 m.

The project provides for the modernization and rehabilitation of 11 streets in the municipality of Salonta, with a total length of 4,926 m. The works aim at modernizing the road infrastructure by creating a modern road structure and asphalt pavement, in order to improve traffic conditions and road safety.

The project provides for the rehabilitation of Bem Joseph and Zilahy Lajos streets, with a total length of approximately 814 m and a carriageway width of 4.00 m. The works include the arrangement of a rainwater collection and drainage system using concrete ditches and carriageway gutters, as well as the construction of a DN500 tubular culvert.

The project provides for work to collect water directed through the designed slope and gradient system, with the installation of gullies proposed to discharge the collected rainwater into the centralized storm sewer system. The parking area will be laid out in some parts with the same road structure as the main alley, and in other parts with a new road structure. The parking spaces to the right of the alley axis will be delimited from the alley by installing 20x25 curbs, which will assist in draining rainwater, directing it towards the designed gullies.

The project provides for the rehabilitation of the access road, over a length of 192 m, as well as the layout of the parking area serving the Permanent Center in the village of Holod, Holod commune, Bihor County. The works aim to improve accessibility, traffic conditions, and the road infrastructure in the center area.

The project provides for the stabilization of the slope by constructing two retaining walls, one flexible and one gravity-based, by creating cellular structures and filling them with riprap, and by planting shrubs.

The project provides for the rehabilitation of two main streets in the village of Dumbrava, Holod commune, Bihor county, with a total length of 804 m. The works aim to modernize the existing road infrastructure, in order to improve traffic conditions, road safety, and comfort.

The project involves the rehabilitation of a street in the village of Chișcău, Pietroasa commune, Bihor county, over a total length of 234 m, through road infrastructure modernization works, in order to improve traffic conditions, safety, and road comfort.

The project provides for the modernization of communal road DC 87, over a total length of 3,925 m, with a view to improving traffic conditions and accessibility in the area. The works include the modernization of the road structure, the arrangement of ditches and gutters for the collection and drainage of rainwater, as well as the construction of tourist platforms related to the route.

The project provides, for the first objective ("Petrileni"), the rehabilitation of 7 streets and a rainwater drainage ditch that will redirect water towards the drop structure located next to the road. Through the completion of the second objective (Valea de Jos), the aim is to rehabilitate 3 streets, create 4 new tubular culverts, a rainwater drainage ditch that will redirect water into the nearby valley, and create a natural slope ditch and a trafficable gutter for redirecting rainwater. Construction of a domestic sewage system for Valea de Jos.

The project provides, for the first objective ("chapel parking lot"), the creation of 26 parking spaces and a one-way access alley that provides access to the parking spaces. A rainwater drainage ditch will be constructed to direct water into the existing collector channel. Through the realization of the second objective (Kindergarten), the aim is to rehabilitate the existing one-way road that provides access to the kindergarten, redo the sidewalk around the building, and create 7 parking spaces. A rainwater drainage ditch will be constructed to direct water toward the designed ditch.

The project provides for the modernization of existing road infrastructure through interventions on streets with a total length of 1,227 m. The works aim to improve traffic conditions, increase road safety and comfort, and bring the streets up to appropriate technical parameters.

The project provides for the construction of 8 access roads to the designed parking lots, with a total length of 351.50 m, the development of 96 parking spaces, and the construction of the rainwater drainage network, which is to be built between Calea Aradului, Lalelelor, Henrik Ibsen, and Cornitelului streets, in Oradea municipality.

The project involves the construction of 8 access roads to the planned parking areas, with a total length of 573.86 m, the development of 194 parking spaces, and the construction of a rainwater drainage network to be built on Calea Aradului, Padisului, and Vladeasa streets, partially incorporating Fagurelui street, in Oradea municipality.

The project provides for the modernization of the existing road infrastructure through interventions on three street sections with a total length of 986 m. The works aim to improve traffic conditions, road safety, and comfort, as well as bringing the street up to the appropriate technical parameters for optimal traffic flow.

The project provides for the construction of a domestic sewage network for the village of Alunis in the commune of Frumuseni, Arad County. This will be presented in sections. The proposed domestic sewage network on the studied streets will connect to the existing network and is made of PVC SN8 material pipes, DN 250 mm, with a total length of 1594 m.

The project includes the following works: the object of this documentation refers to the connection to the existing water supply network and the connection to the existing sewage network of the town of Budureasa, by under-traversing the county road DJ764A.

FS · 09.2022

The project provides for the construction of domestic sewage networks in the localities of Șofronea and Sânpaul, Arad County, through the execution of approximately 14 km of gravity and discharge pipelines, six wastewater pumping stations, manholes, and approximately 600 household connections. The networks will be connected to the existing sewage systems, ensuring the collection and discharge of domestic wastewater from the two localities.

DTAC + PT + DE · 01.2024

The project provides for the construction of two domestic sewage networks in the localities of Șofronea and Sânpaul, Arad County, with a total length of 12,509 m of gravity sewer pipes, 941 m of discharge pipes, and 8,771 m of connection pipes. There are 701 household connections, 296 manholes, and three wastewater pumping stations provided, equipped with submersible pumps, ventilation systems, odor filters, and SCADA automation and monitoring. The project also includes the construction of valve and screen chambers, the installation of protective conduits, the fencing of the pumping stations, and the installation of CCTV video surveillance systems.

The project provides for the construction of a storm sewer network in the town of Nucet, by installing 3,212 m of PVC pipes DN 315–400 mm and 707 m of connection pipes DN 160 mm. The system includes 172 storm drains with traps and sumps, 90 catch basins, and 92 HDPE manholes DN 800 mm, ensuring the collection and discharge of rainwater into the street collector channel.

The project provides for the construction of domestic sewage networks on Nicolae Bogdan and Boiului streets, with gravity and discharge pipes, two pumping stations, manholes, and 20 connections. Additionally, work is planned for the water supply system, consisting of fencing the spring catchment, building a chlorination station, installing a water meter, and executing six interconnection nodes with the existing network. Earthworks will be carried out and the affected road system will be restored.

The project provides for the construction of a storm sewer network using open concrete ditches and drivable gutters. Ghighiseni locality: 2614 m reinforced concrete open ditch, 1205 m drivable gutter, 20 m natural slope ditch. Cucuceni locality: 401 m reinforced concrete open ditch, 301 m drivable gutter.

The project provides for the collection and discharge of rainwater. Rainwater collected from the carriageway via transverse and longitudinal slopes will be discharged into lined ditches, and from there to SPAP 1 (all necessary details regarding the pumping station are included in the drawings within the execution details). At km 0+256.00, there is a tubular culvert, and a rainwater pumping station (SPAP 1) will be built at its end, which will discharge the rainwater through a 120 m long HDPE DN 110 mm pipe into the existing rainwater manhole on Jokai Mor Street.

The project provides for the construction of the rainwater sewer network for the Municipality of Oradea, which is to be built between Henri Coandă, Dimitrie Pompeiu and Calea Aradului streets (up to blocks PC48 and P60) in the municipality of Oradea.

The project provides for the construction of the rainwater sewer network for the Municipality of Salonta, which is to be built on Jean Calvin and Vasile Alecsandri streets, Salonta.

The project provides for the construction of road and pedestrian infrastructure for a developing area, with 1,814.80 m of roadway and 3,212.40 m of sidewalks. The works include 28 parking spaces, 98 property accesses, 114 rainwater drains, and the landscaping of 3,853.40 sqm of green areas. Approximately 8,500 m of prefabricated concrete curbs are provided for delimiting the works.

The project involves the construction of road and pedestrian infrastructure for a residential area, with 3,247 m of roadway, 6,200 m of sidewalks, 93 parking spaces, 246 property access points, and 663 m of bicycle lanes. The works include the development of access to DJ 682 through an intersection with a traffic island, left-turn lanes, acceleration and deceleration lanes, as well as works for rainwater collection and road signage.

The project provides for the expansion and modernization of public utility infrastructure in the studied area through the construction of sanitary sewer, storm sewer, and water supply networks. These works are necessary to ensure optimal operating conditions for future housing plots, in accordance with applicable urban planning and technical requirements. The present project includes modernization and development works for the road infrastructure of two streets located within the town's built-up area, in order to improve road and pedestrian traffic conditions, as well as to ensure proper drainage of rainwater.

The project provides for the expansion and modernization of public utility infrastructure in the studied area through the construction of sanitary sewer, storm sewer, and water supply networks. These works are necessary to ensure optimal operating conditions for future housing plots, in accordance with applicable urban planning and technical requirements. The present project includes modernization and development works for the road infrastructure of two streets located within the town's built-up area, in order to improve road and pedestrian traffic conditions, as well as to ensure proper drainage of rainwater.

The project provides for the expansion and modernization of public utility infrastructure in the studied area through the construction of sanitary sewer, storm sewer, and water supply networks. These works are necessary to ensure optimal operating conditions for future housing plots, in accordance with applicable urban planning and technical requirements. The present project includes modernization and development works for the road infrastructure of two streets located within the town's built-up area, in order to improve road and pedestrian traffic conditions, as well as to ensure proper drainage of rainwater.

The project provides for the construction of road and utility infrastructure for a social housing complex in the town of Pecica, Arad County. The works include the layout of the access road, carriageway and pedestrian platforms, the rainwater drainage system, and green spaces. The utility infrastructure comprises 598 m of water supply network and 562 m of domestic sewage, connections and hookups, as well as a wastewater pumping station (WWPS) with 92 m of discharge pipe.

The project provides for the development of utility and road infrastructure for 44 plots, including 548 m of domestic sewage network and 829 m of water supply network, with 27 connections and 27 service lines. The works also include the development of four streets, with road structure, sidewalks, and stormwater collection and drainage systems via ditches, gutters, and culverts.

The project provides for the construction of platforms, water drainage, and access to the DJ764A county road for the property with cad. no. 51976. The objective of the project is to build the platforms and an access point, along with the drainage of rainwater.

The project involves determining the coordinates of detail points in the WGS-84 geodetic system.

The project provides for the development of technical documentation in order to obtain the approval of the Romanian Civil Aeronautical Authority for the lighting poles related to the project "Increasing accessibility on county roads in the Oradea metropolitan area – Sector II – DJ 797E", located in the Oradea Airport area, situated at the edge of DJ 797E road, Land Register nos. 67015; 67016; 210067; 63769.

Evaluation of aircraft exceeding the design characteristics of the airport for Airbus A300 B4/C4-600 and 600RF types, and Airbus A300 F4-600, respectively.

Evaluation of aircraft exceeding the airport's design characteristics. The types mentioned in the portfolio documentation are Boeing B767-200F/300F, Boeing B777F, Airbus A330-200F/300F, and Airbus A350-1000F.

External audit and management services for the compliance monitoring process within an airport, based on contract no. 878 dated 03.08.2026.

External audit and management services for the compliance monitoring process at an airport, under contract no. 849 of 10.02.2026.

External audit and management services for the compliance monitoring process at an airport, under contract no. 816 dated 03.09.2025.

Training of airport personnel regarding the amendments to Regulation (EU) No. 139/2014 that enter into force based on EASA ED Decision 2024/008/R, ED Decision 2024/004/R, and ED Decision 2024/005/R.

Training airport personnel regarding obstacle limitation and electromagnetic protection surfaces and zones applicable in civil aviation, in relation to the approach category, aerodrome category, and type of CNS facilities.